to: flxnet@ww
subject: F6FBB 7.00G <--> FlexNet 3.3G
Hello All:

This is in response to a query by Jocelyn F6IQA on how to interface the F6FBB

BBS with FlexNet. As described in his original bulletin, running under DOS,

FlexNet with TFEMU loads and runs in the background. F6FBB BBS is then loaded

and runs in the foreground.  This arrangement does work perfectly, as we are

running it at many sites here in the Northeastern USA...

The following lines in three files are key to making F6FBB 7.00g work with

PC FlexNet 3.3g..
**************************************************************

INIT.SRV file:

<snip>
#
# DRSI and TFPC interrupt (Hexadecimal, default FF and FE)
FF FD
#
<snip>
***************************************************************

PORT.SYS file:

#Ports TNCs
1       1
#
#Com Interface Address (Hex) Baud
5    5         0            9600
#
#TNC NbCh Com MultCh Pacln Maxfr NbFwd MxBloc M/P-Fwd Mode Freq
0    0     0   0      0     0     0     0      01/03   ---- FILE
1    10    5   1      230   2     4     10     00/20   UDLY FLEX
#
****************************************************************
INITTNC1.SYS file:

M UISC
I WA2PNU-4
O 2
Y 10
****************************************************************
APPEL.BAT file:

"rem" these two files out

rem ESS 1
rem ESS 2
****************************************************************

Hope this helps at least one struggling SysOp !